RS Security Co., Ltd.

RS Security Co., Ltd.

how to installation 3 arm turnstile

2018 01/09

RS Security Co., Ltd is a comprehensive enterprise that integrates multidisciplinary and cross-industry development with its tripod turnstile, flap barrier, swing barrier, full height turnstile, glass turnstile. With the development of science and technology and the popularization of computer, Work from the original single manual control to the direction of the development of mechatronic control, management tools formed from manual management to computer-aided management and computer management pattern.3 arm turnstile
We uphold and promote "RS Security Co., Ltd", who enhances every day a little bit, to implement the actual work, leaps and bounds of the pace of development and dedicated entrepreneurial spirit, not only touched the vast number of consumers, but also Won the government and industry widely recognized inside and outside.
3 arm turnstile Access RS Security Co., Ltd We sincerely thank the new and old customers for their trust in our company's brand. We are grateful to all parties in the society for their support of our company. Our company will pay close attention to the direction of the industry and keep innovating and upgrading The overall strength of enterprises and dedicated new and old customers to provide more advanced products and services.

RS Security Co., Ltd sincerely thank the old and new customers over the years the trust of my company's brand, thanks to all sectors of the community for their strong support of our company, our company will pay close attention to the direction of the industry, continuous technological innovation and enhance the overall strength of enterprises, Dedication to new and old customers to provide more advanced products and services.
Tripod Turnstile System
"Improve a little everyday" - RS Security Co., Ltd.

3 arm turnstile Access control products we often use, but for the installation process in the end how we may not quite understand, Innovate technology to explain to you about 3 arm turnstile access control installation methods and processes. First of all, how to install 3 arm turnstile access control should pay attention to the following questions:
3 arm turnstile Access Before completing the installation, complete the communication with the customer. Understand the environmental conditions of the site To determine the program:
First, formulate construction plans
Installation site is open-air or indoor venues, the use of open-air will have to choose to wear waterproof box 3 arm turnstile, so as to avoid weather caused by the circuit board corrosion; waterproof box selection should also be more environmentally friendly options, the South can use Shuo plastic waterproof Box plus temperature system, the north can use iron waterproof box plus temperature control system.
3 According to the host computer and 3 arm turnstile access to choose between the wiring distance (to go straight line or take the dark line and the controller communication (general computer and 3 arm turnstile access within 800 meters, we recommend selecting 485 Communication, at a distance of 800 meters or more we choose TCP network communication.

Second, the preparatory work before installation

bus tripod turnstileGenerally before installation according to the actual size of 3 arm turnstile in the field slotted good 2 6-8 points plastic tube, 3 arm turnstile and 3 arm turnstile left between the 50-00mm gap for the back to facilitate open the top Cover, adjust the machine, easy to maintain, etc., embedded between equipment and equipment, you must use a rubber hose to take the power cord (strong electricity, another rubber hose to take the signal line (weak, not the power cord and signal line to go a hose , So easy to produce security risks Communication effects will also be affected.Preposed pipe to expose the ground 30-40mm high, the line bridge 3 arm turnstile should be good on both sides, vertical 3 arm turnstile should be better at the bottom of the machine .
Third, fixed adjustments

Fixed bottom with 4-M000 expansion screws, can not swing, the overall appearance of the whole line, (preferably fixed thin wire straight line, vertical and horizontal consistent, 3 arm turnstile and 3 arm turnstile in series with each method , Until it can be used normally .3 arm turnstile should be placed horizontally with the ground, so the effect and 3 arm turnstile life will be in the best condition.

Fourth, the importance of installing the ground

waist height turnstileAccording to what I learned in the past, some customers did not have a valid cable after installing 3 arm turnstile. 3 arm turnstile shell mostly stainless steel, if the shell is not ground wire will cause great safety hazard to the user's personal safety.

3 arm turnstile Access control on the market is a large amount of use of a product, it has anti-tail ability, easy operation and good stability. 3 arm turnstile products are also the earliest channel products on the market, follow-up swing barrier, flap barrier, speed gate, etc. are derived from 3 arm turnstile. If you still do not understand the use of the process can contact us Innotone staff know that we will be happy to help you.